4 stk. 57 Integrated Servo Motor 180W 3000RPM – NEMA23 Compatible Til ULTIMATEBEE

Beskrivelse

 Integrated Servo Motor 180W 3000RPM. cnc hobby Integrated Servo Motor. hobby cnc Integrated Servo Motor. Integrated Servo Motor unik danmark .Integrated Servo Motor small buiesness.

57 Integrated Servo Motor 180W 3000RPM – NEMA23 Compatible

Den integrerede servo  motor 57 er en motor med en effekt på 180 watt og en hastighed på 3000 omdrejninger pr. minut.

Den er designet til at være kompatibel med NEMA23 standarden, hvilket gør den velegnet til brug i forskellige applikationer

såsom CNC-maskiner, robotter og automatiserede systemer.

Den integrerede servomotor kombinerer en motor, en encoder og en controller i en enkelt enhed.

Dette gør det nemt at installere og styre motoren, da den ikke kræver eksterne enheder.

Med sin høje effekt og hastighed kan den integrerede servomotor 57 levere præcise og hurtige bevægelser.

Det kan også tilpasse sig ændringer i belastningen og opretholde en stabil drejningsmoment.

Denne servomotor er velegnet til applikationer, der kræver præcis positionering og hurtige accelerations- og decelerationsfunktioner.

Dens NEMA23 kompatibilitet gør det nemt at udskifte eksisterende motorer og integrere den i forskellige systemer.

Samlet set er den integrerede servomotor 57 en pålidelig og effektiv motor, der kan opfylde behovene i en bred vifte af applikationer.

57 Integrated Servo Motor 180W 3000rpm 0.6Nm

Specifications：

• Quantity:1pc
• Model: IHSV57-30-18-36-01-BY
• Size: 52 x 76 x 148mm (2 x 3 x 5.8″)
• Applicable motor: for iHSV57-30-18-36
• Input voltage: 20~50V DC (Typical Value 36V)
• Power: 180W
• Shaft Diameter: 8mm
• Torque: 0.6NM
• Rated Speed: 3000
• Impedance: 0.53±10%Ω
• Continuous output current: 6A
• Speed response frequency: 50KHz
• Peak torque: 1.71
• Maximum pulse frequency: 250K
• Default rate: 9.6Kbps (Required external conversion interface)
• Cooling mode: Natural cooling or forced air cooling
• Typical applications: CNC, printing, laser, textile machine, etc

Using Environment:

• As far as possible to avoid dust, oil mist and corrosive gases
• Working temperature: 0~+70℃
• Storage temperature: -20℃~+80℃
• Humidity: 40~90%RH

Protection:

• Peak value of over current action value 30A + 10%
• Overload I2t current action value of 300% 5S
• Overheating action value of 80
• Overvoltage action value 65V
• Action value of under voltage 18V

Features: 

① Full Closed Loop

• Precise position and speed control to meet the most demanding application requirements.
• Highly robust servo control can adapt to a wide range of inertial loads and frictional load changes.
• High resolution encoder provides accurate position accuracy.

② Low Heating / High Efficiency

• Adjust the current in real time according to the actual load conditions to minimize heat generation.
• The current is almost zero and no heat at rest.
• Close to 100% torque output capacity, maximizing the energy conversion rate in the most compact space, which is in low power-consumption and high efficiency.

③ Smooth and Accurate

• Based on the encoder space vector current control algorithm, it has excellent performance in the full speed range. Even at low speed applications, it can maintain a smooth and quiet operation.
• Ensure accurate positioning both during operation and at rest.

④ Exercise Monitoring

• For some applications where real-time motion has extremely demanding accuracy requirements, JMC servo debugging software provides a simple and practical tool for monitoring the actual trajectory.
• Can be used to monitor commonly used indicators such as actual speed and position error, as a rating system current actual performance.
• The interface of interactive monitoring and tuning can get the most optimized performance output as quickly as possible.

 

ALM and PEND Signal Output Ports

Control Signal Input Ports

Power Interface Port

Input voltage		24~50VDC(36V typical value )
Continuous output current		6A
Maximum pulse frequency		250K
Default rate		9.6Kbps（Required external conversion
		interface）
Protect		▸Peak value of over current action value 30A±10%/td>
		▸Overload I2t current action value of 300% 5S
		▸Overheating action value of 80
		▸Overvoltage action value 65V
		▸Action value of under voltage voltage 18V
Use environment	occasion	As far as possible to avoid dust, oil mist and
		corrosive gases
	working temperature	0~+70℃
	Storage temperature	-20℃~+80℃
	humidity	40~90%RH
	Cooling mode	Natural cooling or forced air cooling

 

---

Integrated Servo Motor 180W 3000RPM. cnc hobby Integrated Servo Motor. hobby cnc Integrated Servo Motor. Integrated Servo Motor unik danmark .Integrated Servo Motor small buiesness.

---

 

>>> >>> >>>

SENDT MAIL FB GRUPPEN INFO CENTER

---

Alternative links

NEMA 23 STEPPER MOTOR

STEPPER MOTORE